Sound Settings; Speaker Level; Adaptive Drc - Yamaha YSP-3300 Owner's Manual

Setup menu
BEAM
TV
y
1)
When the sound beam output method is set to "MY SUR." (My
Surround) with the BEAM key, the following items can be configured.
Sub menu: Center, Surround L/R, Subwoofer
62
En

SOUND settings

SPEAKER LEVEL

Adjust the volume of each channel to balance output levels. Use
test sounds output from each channel to adjust volume for
optimal balance.
AUX
Sub menu: Front L, Front R, Center, Surround L,
Surround R, Subwoofer
Adjustable range: -20 to +20

Adaptive DRC

Adjust this unit's volume and dynamic range
balance. When "ON" is selected, dynamic range is adjusted as
follows for optimal listening at low volumes, such as might be
used at night.
When the volume level is low:
Narrow the dynamic range. Loud sound is played back softer, and
soft sound which is hard to be listened to is played back louder.
When the volume level is high:
Widen the dynamic range. For both soft and loud sounds, source
sound is played back without adjusting volume.
On
Input level
Selectable item: ON*, OFF
"ON": Adjust the dynamic range automatically.
"OFF": The dynamic range is not adjusted automatically.
y
2)
• When set to "ON", "DYNAMIC RANGE" is automatically set to
"Max".
• This setting is not available when the UniVolume function is enabled.
1)
2)
On
Off
Input level
Volume: low Volume: high
3)
for optimal
Off