Volume Trim - Yamaha YSP-3300 Owner's Manual

Option menu items
The following menu items are provided for each input.
Input source
TREBLE, BASS, VOLUME TRIM, AUDIO
HDMI1– 4
DELAY, AUDIO ASSIGN
TV
OPTICAL
TREBLE, BASS, VOLUME TRIM, AUDIO
DELAY
AUX
ANALOG
YIT TREBLE, BASS, VOLUME TRIM
FM TREBLE, BASS, VOLUME TRIM, AUTO
3)
(YSP-4300 only) PRESET
USB TREBLE, BASS, VOLUME TRIM, REPEAT
(YSP-4300 only) SHUFFLE
The option menu items are listed below. These settings are
applied to the currently selected input source. The default settings
are marked with "*".
Adjusting tones (TREBLE, BASS)
Adjust the output level of high (treble) and low (bass) tones.
Adjustable range: -12 to +12 (default: 0)
Adjusting input level of each jack

(VOLUME TRIM)

Adjust the input level for each jack to compensate for variations
in volume between different input devices.
Adjustable range: -12 to +12 (default: 0)
y
3)
See "FM tuning (YSP-4300 only)" (☞p. 44).
Menu items
3) 3)
, CLEAR PRESET , FM MODE
4)
Audio delay control (AUDIO DELAY)
TV images sometimes lag behind the sound. You can use this
function to delay the sound output to synchronize it with the
video image.
Adjustable range:
HDMI1– 4: AUTO*, 0 ms to 500 ms
TV, OPTICAL, AUX, ANALOG: 0 ms* to 500 ms
When "AUTO" is selected, output timing is automatically
adjusted. This setting is only available when the TV connected
via HDMI cable supports the audio delay automatic adjustment
feature.
Assigning HDMI audio to a different input
jack (AUDIO ASSIGN)
4)
,
When HDMI1– 4 is the selected input source, sound can be input
from the OPTICAL or AUX (digital coaxial) jack rather than the
HDMI jack.
Selectable item: HDMI*, OPTICAL, AUX
y
Tip
While the AUX INPUT DIGITAL (coaxial) jack is the default AUX
setting, sound is input as follows depending upon the setting
specified for "TV INPUT" (☞p. 63) in the setup menu.
"TV INPUT" set to "OPTICAL" (default)
When "AUX" is selected, sound is input from the AUX INPUT
DIGITAL (coaxial) jack.
"TV INPUT" set to "COAXIAL"
When "AUX" is selected, sound is input from the INPUT DIGITAL
TV (optical) jack.
y
4)
• See "Connecting a USB device" (☞p. 54).
• The REPEAT and SHUFFLE features in the option menu can be used
when an iPod is connected to this unit via the USB cable supplied
with the iPod (☞p. 51).
• The REPEAT feature can be used when a USB device is connected to
this unit (☞p. 57).
Playback features
43
En