Beam Settings; Horizontal Angle; Beam Travel Length; Focal Length - Yamaha YSP-3300 Owner's Manual

Digital sound projector
Hide thumbs Also See for YSP-3300:
Table of Contents

Advertisement

Setup menu

BEAM settings

When "AUTO SETUP" in the "IntelliBeam" menu (☞p. 24) is
used, recommended beam settings are automatically applied by
this unit. "HORIZONTAL ANGLE", "BEAM TRAVEL
LENGTH", "FOCAL LENGTH" (except "Center"), and
"IMAGE LOCATION" settings, however, can later be
fine-tuned.
Surround sound channel output can also be modified from the
"BEAM" menu.

HORIZONTAL ANGLE

Adjust the horizontal angle of sound beams for each channel
using test tones.
Adjust toward L (left) to move the direction of the output to the
left and adjust toward R (right) to move it to the right.
Beam angle
Angle to
left
1)
Sub menu
: Front L, Front R, Center. Surround L,
Surround R
Control range: L90° to R90°
Left
key:
Increase angle.
key:
Decrease angle.
y
1)
Channels that cannot be configured are displayed in grey as settings are
specified as indicated in "Changing the audio output method for surround
playback" (☞p. 36).
60
En
Angle to
right
Right
key:
Increase angle.
key:
Decrease angle.

BEAM TRAVEL LENGTH

Specify the distance that sound beams travel for each channel.
The distance starts at this unit, ends at the listening position, and
includes refraction off a wall. The audio delay is adjusted and
sound from each channel arrives at the listening position
simultaneously.
1)
Sub menu
: Front L, Front R, Center, Surround L,
Surround R
Control range: 0.3 m to 24.0 m (1.0 ft to 80.0 ft)
Sub menu: Subwoofer
Control range: 0.3 m to 15.0 m (default: 2.5 m) (1.0 ft to
50.0 ft (default: 8.5 ft))
The length of each
arrow indicates the
beam travel length.
3)

FOCAL LENGTH

Expand the optimal listening area (sweet spot).
The illustration below shows how output from all channels is
once concentrated in a focal point and then expanded from that
point. Apply negative (-) values to broaden the sweet spot, or
positive (+) values to narrow the sweet spot.
Focal
length
Focal
point
We recommend using the default setting (-0.5 m or -1.5 ft) for
"Center".
1)
Sub menu
: Front L, Front R, Surround L, Surround R
Control range: -1.0 m to +13.0 m (-3.5 ft to +43.5 ft)
Sub menu: Center
Control range: -1.0 m to +13.0 m (default: -0.5 m) (-3.5 ft
to +43.5 ft (default: -1.5 ft))
2)
Note
Configure this setting only when you have adjusted "HORIZONTAL
ANGLE".
y
3)
"AUTO SETUP" (☞p. 24) automatically enables a range for optimal
listening (sweet spot) that is broader than the width of this unit.
2)
Sweet
spot

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ysp-4300Ysp-cu3300Ns-wsw160

Table of Contents