Saving Energy With The Eco Function; Switching Information Displayed In The Front Panel Display - Yamaha YSP-3300 Owner's Manual

Digital sound projector
Hide thumbs Also See for YSP-3300:
Table of Contents

Advertisement

Saving energy with the Eco function

When the Eco function is enabled, this unit automatically enters
standby mode as follows.
• No operations are performed with this unit for 3 hours
• No input signal is received for 30 minutes
• Playback of content stored on the iPod connected to
YIT-W12TX is stopped for 2 minutes
• The iPod to which YIT-W12TX is connected is turned off.
• The iPod to which YIT-W12TX is connected enters sleep
mode.
• The YIT-W12TX is disconnected from the iPod.
• The YIT-W12TX is disconnected from the computer.
Press the ECO key.
"ECO ON" is displayed and the front panel display turns off.
ECO ON
The brightness of STATUS and SURROUND indicators is
minimized.
y
Tips
The following restrictions apply when the Eco function is enabled.
This unit will not turn on when content stored on the iPod to
which YIT-W12TX is connected is played. For details of
YIT-W12TX, refer to "Safety and Accessory Information"
(separate booklet).
If this unit is configured to output audio from the TV using the
HDMI control function (☞p. 31), this unit will enter standby
mode.
Disabling the Eco function
Press the ECO key.
"ECO OFF" is displayed in the front panel display.
y
2)
This unit enters standby mode after 12 hours have passed since the last
operation was performed, even when the Eco function has been set to
"OFF".
Switching information displayed in the front
panel display
The input source and surround information is displayed.
2)
Press the INFO key.
Display changes as follows each time the INFO key is pressed.
The specific information displayed varies according to the input
source.
Input source: HDMI1– 4, YIT, TV, OPTICAL, ANALOG, FM
Input: Name of the input source
(When FM is input, an FM station frequency is
displayed.)
Beam: Beam mode setting (☞p. 36)
Decoder: Current decoder (☞p. 38)
Cinema DSP: CINEMA DSP program (☞p. 34)
See pages 53 and 56 for instructions on switching display when
the input source is USB.
y
3)
YSP-4300 only
Playback features
3)
3)
41
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ysp-4300Ysp-cu3300Ns-wsw160

Table of Contents