Dynamic Range; Dolby Pliix Parameter; Hdmi Setup; Hdmi Control - Yamaha YSP-3300 Owner's Manual

3)

DYNAMIC RANGE

Adjust this unit's dynamic range.
Selectable items: Max*, Standard, Min/Auto
Max: Outputs sound without adjusting the dynamic range of the
4)
input signals.
Standard: The dynamic range recommended for regular home
use.
Min/Auto:
Min: Sets dynamic range at a level that supports comfortable
listening at low volumes.
Auto: Sets dynamic range in accordance with information
received from input signal.

Dolby PLIIx PARAMETER

Adjust Dolby Pro Logic IIx Music surround decoder parameters.
Sub menu: Center Width
The greater the value, the broader the sound to the left and right.
Smaller values restrict sound to the center.
Adjustable range: 0 to 7 (default: 3)
Sub menu: Panorama
When this is set to "ON", sounds from the front left and right
channels are routed to the left and right for a surround, panoramic
effect.
Selectable item: OFF*, ON
Sub menu: Dimension
This setting adjusts the difference in levels between the front and
surround channels. The greater the value, the higher the volume
from the front channel. The smaller the value, the higher the
volume from the surround channels.
Adjustable range: -3 to +3 (default: 0)
y
3)
Dynamic range describes the difference between minimum and
maximum volume.
y
4)
"Adaptive DRC" is automatically set to "OFF" when the settings other
than "Max" is selected.

HDMI setup

Use to configure the settings related to HDMI signals and the
HDMI control function.

HDMI CONTROL

Turn HDMI control (☞p. 30) on or off.
Selectable item: OFF*, ON
"OFF": Disable the control function. The standby power
consumption of this unit decreases.
"ON": Enable the control function.

HDMI AUDIO OUT

Use to select a component to play back HDMI audio signals. This
setting is effective when "HDMI CONTROL" is set to "OFF".
Selectable item: AMP*, TV
"AMP": Play back the input sound signal.
"TV": Plays audio content from the TV connected to the HDMI
OUT (ARC) jack.

TV INPUT

If your TV is not ARC compatible (or if the ARC feature has
been disabled), TV audio is input via the INPUT DIGITAL TV
(OPTICAL) jack (default). This unit's input source can be
changed to the AUX INPUT DIGITAL (COAXIAL) jack.
Selectable item: OPTICAL*, COAXIAL
y
5)
HDMI video signals input to one of the HDMI IN jacks of this unit are
always output from the HDMI OUT (ARC) jack of this unit.
y
6)
If this unit's input source is switched to "COAXIAL", audio is input
from the device (TV) connected to the AUX INPUT DIGITAL jack on
this unit when the TV key is pressed. Audio is input from the device
connected to the INPUT DIGITAL TV jack on this unit when the AUX
key is pressed.
Setup menu
5)
6)
63
En