Advertisement
2, Loosen,but do NOTremove,the hex nutfoundon the
rightsideof the brakeassembly,See Figure13,
3, Usinga feelergauge,set the gap betweenthe brake
disc and the brakepuck at ,011",
4, Reqightenthe hexnut loosenedearlier,
Seat
Adjustment
WARNING: Before operating this
machine, make sure the seat is engaged
in the seat stop, stand behind the
machine and pull back on seat until fully
engaged intostop.
1, Flipthe seat up as shownin Figure14,
2, Loosenthetwo seat adiustmentknobslocatedunder
the seat, See Figure14,
3, Slidethe seat forwardor rearward,then tightenthe
knobsto lock the seat at thedesiredposition,Put the
seat downto the operatingposition,
Set gap
,011
Figure 13
Hex Nut
Steering
Adjustment
If the tractorturnstighter in one directionthan theother,
or if the ball ioints are being replaceddue to damageor
wear,the steeringdrag linksmay need to be adiusted,
Adiust thedrag links so that equal lengthsare threaded
into the ball iointon the left and right side:
1, Loosentheiam nut foundon the drag linkat the rear
of the ball ioint, See Figure15,
2, Removehex nuton the topof ballioint, See Figure15,
3, Threadthe balljointtowardtheiam nutto shortenthe
drag link, Threadthe ballioint awayfrom theiam nut
to lengthenthe drag link,
4, Replacehex nutand retightenthejam nut after proper
adiustmentis achieved,
NOTE:Threadingthe ballioints too far ontothe drag links
will causethe front tires to "toe=in" too far, Propertoe=inis
between1/16"and 5/16",
Figure 14
Fronttire toeqncan be measuredas follows:
1, Placethe steeringwheelin positionfor straightahead
travek
2, Infront of the axle, measurethe distancehorizontally
from the insideof the left rimto the insideof the right
rim, Notethe distance,
3, Behindtheaxle, measurethe distancehorizontally
from the insideof the left rimto the insideof the right
rim, Notethe distance,
4, The measurement t aken in frontof the axle shouldbe
between1/16"and 5/16"less thanthe measurement
taken behindthe axle, Adiustif necessary,
Figure 15
19
NOTE: Threading the
bal joints too far onto
the drag linkswill cause
the front tires to "toe-in'
too far, Propertoe-in
is between 1/16"and
5/16".
Advertisement
