Download  Print this page

Before Starting Playback - Sharp BD-HP21U Operation Manual

Hide thumbs

Advertisement

Before
Starting Playback
,, 3 types of remote control codes operate this
Player: RC--1, RC-2 and RC--3. If you operate
this Player by remote control along with another
SHARP Blu--ray Disc Player or DVD Player placed
next to it simultaneously, switching the remote
control code (both the Player and remote control)
to one of the signals (RC--1, RC-2 or RC--3) will let
you operate only with this Player.
,, Make sure to set the Player and remote control to
the same remote code. You can not operate the
Player if they are not set to the same code.
Example: Setting the code to "RC-3".
The Universal Remote Control may operate the
basic functions of the SHARP TV.
• TV Power: POWER
• TV Channel up/down: CH A/V
• TV Volume up/down: VOL +/
• TV-AV Selector: INPUT
2
Press and hold 3 first and then
POWER
on the remote control
together
for more than 5 seconds.
Press POWER
(on the player) to
turn off the player.
POWER
3
Point the remote control
at the
player, then press and hold the
DISPLAY
button
for more than 10
seconds.
Remote control sensor
4
Press POWER (on the remote
control) to turn on the player.
(_-21

Advertisement

Table of Contents
loading

  Also See for Sharp BD-HP21U