Sharp BD-HP21U Operation Manual page 25

/DVD/CD ayback
POWER OPEN/
CLOSE
PLAY SlOP
TOPMENU_TITLE LIST
}}:
This section explains playback of commercially
available BD Video and DVD Video discs (like
movies), CDs, and recorded DVD-RW/R discs.
1 Press POWER to turn on the power.
2
Press OPEN/CLOSE to open the
disc tray.
POWER OPEN/CLOSE
3
Load a disc on the disc tray.
• Insert the disc with the label face up.
• In case of disc recorded on both sides,
face down the side to play back.
4 Press OPEN/CLOSE to close the
disc tray.
2
Load a disc.
• Playback may begin automatically,
depending on the disc.
Press _ PLAY.
• Playback begins from the first title.
• The menu may be displayed first,
depending on the disc. Perform
playback operation by following the
directions on the screen.
,' This section explains how to play back a BD/DVD
video disc with a top menu, disc menu or pop-up
menu,
,, The titles listed in the top menu and a disc guide
(for options like subtitles and audio languages) are
given in the disc menu,
1 Press TOP MENU/TITLE LIST.
• The top menu screenis displayed.
TOP MENU
2
Press A/Y/41/I_ to select the title,
then press ENTER.
• The selected title is played back.
NOTE
" The procedure explained on this page is the basic
operation procedure, Procedures vary depending
on the BD/DVD video disc, so you may need to
follow the instructions in the BD/DVD video disc
manual or the instructions displayed on the screen,
,, A top menu is not displayed for a DVD-RW/R
(Video format) if it has not been finalized,
Top menu
,, With some BD/DVD discs, the top menu may be
referred to as the "Title Menu". Use TOP MENU/
TITLE LIST on the remote control when the
instructions refer to "Title Menu".
,, If no top menu is available, the TOP MENU/TITLE
LIST button will have no effect.
NOTE
,' ]he disc load time may vary depending on the disc.
To stop playback
Press [] STOP.
Resume playback function
,' If you press _ PLAY next, playback will resume
from the point where the Player was previously
stopped. To playback from the beginning, cancel
resume mode by pressing [] STOP, then press _-
PLAY. (This may not work depending on the type
of disc. In this case, open the disc tray or enter
standby,)
NOTE
" Resume playback may not function depending on
the disc,
- 24