If multiple angles are recorded, you can switch
• The Function Control screen is
displayed on the T_.
to select the Angle
Number column, then press ENTER.
Number, then press ENTER.
• ,,_. is displayed if a disc is recorded
with only one angle.
Press o_'_ RETURN or FUNCTION
to close the Function Control
,' Settings for audio and subtitles carl be changed
also in Function Control Screen (Page 32).
,, The operations of subtkles, angle and audio differ
according to each disc. You may need to refer to
the operation manual of the disc.
,, The following operations will not work when playing
back an audio CD:
Slow Playback, Frame Advance
The display for subtitles, angle or audio
automatically disappears after 5 seconds.
You can switch the subtitles and audio at the
Function Control screen (Page 32),
The operation for each function varies depending
on the disc. See the manual for the disc.
You cannot perform Fast Forward/Fast
between titles, At the end or beginning of the title,
Fast Forward/Fast Reverse will be cancelled and
normal playback will automatically resume,
Subtitles are not played back with BD/DVD video
discs during Fast Forward and Fasl Reverse.
Depending on the disc and the scene being played
back, the Player may not operate at the speed
listed in this manual when performing Fast Forward.
You cannot perform Slow Playback between
titles. At the end of the title, Slow Playback will be
cancelled and normal playback will automatically
,, Repeat Playback may be forbidden depending on
,, Partial Repeat Playback may not work in multi--
,, For Partial Repeat Playback, set the start and end
points within the same title.
,' The displayed items vary depending on the disc.
,, If you access the Function Control screen during
playback of a BD/DVD video, it may be impossible
to operate the BD/DVD video playback. In cases
like this, close the Function Control screen.
You can change
so that Angle Mark
appears in the right bottom part of the screen
when multiple angles are recorded. (The
Angle Mark is only displayed for DVD video.)
The settings can be changed in "SEqq-INGS"
- "PLAYBACK SEqq-ING" - "ANGLE MARK
DISPLAY" (Page 36).