Download  Print this page

Sharp BD-HP21U Operation Manual page 21

Hide thumbs

Advertisement

re Star'tin
layback
1
Hold in the tab on the battery
cover and pull the
Remotecontrol sensor
cover towards
the direction
of the arrow.
2
Load the two "AA" size batteries
(R-06 size,
UM/SUM-3).
Place batteries
with their terminals
corresponding
to the (_ and C) indications
in
battery
compartment.
C)_
7m
0
@
4 Remote control unit
3
Insert the smaller
tab of the battery
cover into
the opening
_,
and press down on the cover
until it clicks in place _.
--
@
Plug the supplied AC cord into the AC IN terminal on the rear
of the Player. Then plug into AC outlet.
NOTE
Do not subject the remote control unit to shock, water or
excessive humidity.
The remote control unit may not function if the Player's remote
sensor is in direct sunlight or any other strong light.
Incorrect use of batteries may cause them to leak or burst. Read
the battery warnings and use the batteries properly.
Do net mix old and new batteries, or mix different brands.
Remove the batteries if you will net use the remote control unit for
an extended period of time.
fb AC IN terminal
To AC outlet
NOTE
o PJace the Player close to the AC outlet, and keep the power plug
within reach.
TO PREVENT RISK OF ELECTRIC SHOCK. DO NOT TOUCH THE
UNINSULATED
PARTS OF ANY CABLES WHILE THE AC CORD
IS CONNECTED.
The SIANDBY indicator blinks while the Player is preparing for
starting up. You cannot turn the Player on until the STANDBY
indicator stops blinking.
(_
= 20

Advertisement

Table of Contents
loading

  Also See for Sharp BD-HP21U