Connecting To The Hdmi Terminal - Sharp BD-HP21U Operation Manual

Before Starting Playback
If you feel that the indicators on the Player are
too bright when watching movies, you can turn
them off except for the ON indicator.
"1 Press SETUP to display the SETUP
MENU screen.
2
Press A/Y/_I/_ to select
"SETTINGS", then press ENTER.
3 Press A/Y to select "FRONT
DISPLAY/LED", then press ENTER.
4 Press 4/_ to select "ON" or "OFF",
then press ENTER.
5 Press SETUP or EXIT to exit.
What is AQUOS LINK?
Using the HDMI CEC (Consumer Electronics
Control), with AQUOS LINK you can
interactively operate this player with your
SHARP AQUOS T_.
What you can do with AQUOS LINK
When you connect this player to the LCD TV
compatible with AQUOS LINK using an HDMI
cable, you can perform the function listed
below. (See page 15 for connecting to the
HDMI terminal).
Playback function turns on the LCD TV
immediately.
When you start to playback of this player,
Power of LCD TV will be turned on and the
playback image will appear on the screen.
Automatic input select function
When you start playback of this player, the input
selector of the LCD TV will automatically switch
to the LCD TV input terminal connected to
the player and the playback image will appear
on the screen, even if you are watching a TV
program.
Automatic power off function
If you turn off the LCD TV when this player is
in stop mode, the power of this player will be
turned off automatically. (In the case, while
playing back a disc, the power does not turn
off.)
Automatic power on function
When you switch to the LCD TV input terminal
connected to this player, the power of this
player will be turned on automatically.
NOTE
_' In order to make AQUOS LiNK aw_ilable, set up
AQUOS LiNK on the LCD FV that is connected to
this player, See page 36 regarding the setup of this
player,
Refer to the Operation Manual of the fV for details
regarding setup,
- 23