Table of Contents
Advertisement
Playback
Before Starting Playback
Loading the Batteries in the Remote
Control
Hold in the tab on the battery cover and pull the
1
cover towards the direction of the arrow.
Load the two "AA" size batteries (R-06 size,
2
UM/SUM-3). Place batteries with their terminals
corresponding to the m and n indications in
battery compartment.
Insert the smaller tab of the battery cover into
3
the opening 1, and press down on the cover
until it clicks in place 2.
WARNING
• Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near a
heater.
This can cause batteries to leak, overheat, explode or
catch fire.
It can also reduce the life or performance of batteries.
NOTE
• Do not subject the remote control unit to shock, water
or excessive humidity.
• The remote control unit may not function if the Player's
remote sensor is in direct sunlight or any other strong
light.
• Incorrect use of batteries may cause them to leak or
burst. Read the battery warnings and use the batteries
properly.
• Do not mix old and new batteries, or mix different
brands.
• Remove the batteries if you will not use the remote
control unit for an extended period of time.
Approximate operating range of
remote control
Remote control sensor
*Approx. 7 m
15º
30º
30º
15º
Remote control unit
Connecting the Power Cord
Plug the AC cord into AC outlet.
NOTE
• Place the Player close to the AC outlet, and keep the
power plug within reach.
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH THE UN-INSULATED PARTS OF ANY CABLES
WHILE THE AC CORD IS CONNECTED.
• The B (On/Standby) indicator blinks while the Player is
preparing for starting up. You cannot turn the Player on
until the B (On/Standby) indicator stops blinking.
• If you are not going to use this Player for a long period
of time, be sure to remove the AC cord from the AC
outlet.
21
Advertisement
Table of Contents
