Download  Print this page

Sharp BD-HP21U Operation Manual page 30

Hide thumbs

Advertisement

Playback
Functions
i;
NOTE
,, Some operations in the followk_g playback
function cannot be performed depending on the
specifications
of the disc.
"1
Press REPEAT
during
playback.
2
Press 4/_
to select
"SCENE
SELECTION",
then press ENTER.
[
3
4
"SET START POINT" displays.
Press ENTER at the scene where
you want.
* "SET END POINT" displays.
Press ENTER at the scene where
you want to set the end point.
,, You can press _
FWD to fast forward
to the scene where you want to set the
end point. When you reach the desired
scene, simply press _ PLAY and then
ENTER to set the end point. To cancel
Repeat Playback, press REPEAT.
NOTE
_' Press _
SKIP/I_,
the Repeat Playback is
cancelled and the next chapter being play back.
_, Press |._
SKIP/'_| once, the Repeat Playback
is cancelled and the player returns to the slart of
current chapter (track).
_, If you press _4
SKIP/4|
again (within about 5
seconds) the player will skip to the beginning of the
previous chapter (track).
_, For Partial Repeat Playback, set the start and end
points within the same title.
_, Repeat Playback may be forbidden depending on
the disc.
_, Partial Repeat Playback may not work in multi-
angle scenes.
_, If you press DISPLAY, you can confirm the Repeat
Playback status.
You can change the audio output channel using
AUDIO.
Each time AUDIO is pressed, the audio
channels change as follows:
The audio track currently being played back will
be displayed.
ii!i!i_ei_i_iii_
i ii
When a recorded
broadcast
with stereo or
monaural
audio is played back"
"Stereo" is displayed. (Audio cannot be
switched.)
NOTE
_' When you play a program recorded in stereo
or monaural, and if you are listening to the
BITSTREAM sound via the digital output jack, you
cannot select the audio channel. Set "AUDIO OUT"
to "PCM" (Page 35), or if you want to change the
audio channel, listen via the analog output jacks.
If subtitles are provided in multiple languages,
you can switch between them.
Press SUBTITLE
during
playback.
* The display indicates the subtitle number
currently being played back, and the subtitles
appear.
Each time SUBTITLE
is pressed, the
subtitles change.
* "- -" is displayed if a disc has no subtitles.
* You can also select "OFF".
- 29

Advertisement

Table of Contents
loading

  Also See for Sharp BD-HP21U