Quick Start / Manual Program; Guest User / Profile Program - Schwinn 250 Owner's Manual

Quick Start / Manual Program
The Quick Start / Manual program lets you start a workout without entering any information.
1. Sit on the machine.
2. Push the QUICK START button to start the QUICK START / MANUAL program.
3. To change the resistance level, push the Increase/Decrease buttons. The current interval
and future intervals are set to the new level. The default Quick Start resistance level is 3. The
time will count up from 00:00.
Nete:The maximum time value is 99:59.
4. Push STOP when done with your workout.
Guest User / Profile Program
The Guest User / Profile program lets you select a profile workout without entering any informa-
tion.
.
2.
3.
.
.
Sit on the machine.
Push and hold the the START/ENTER button for 3 seconds.
Use the Increase(A) or Decrease(T) buttons to select one of the profile programs. Push
START/ENTER to select the profile program.
Use the Increase(A) and Decrease(T) buttons to adjust the workout time. Push START/EN-
TER.
Note: The range of values for TIME is 5 - 99 minutes; the default value is 30:00.
Use the Increase(A) and Decrease(T) buttons to adjust the resistance level. Push START/
ENTER.
Note: The range of values for LEVEL is 1 - 16; the default resistance level is 3.
6. Push the START/ENTER button to start the profile workout. The time will count down from
the set time.