Information Codes - Samsung DV456EWHDSU/AA User Manual

troL]beshootinG
Shuts off before load is dry •
®
Lint on clothes
Garments still wrinkled after
Wrinkle-Care
Odors remain in clothing
after Refresh.
Water drips from nozzle
when Steam-Care starts
Sprayed water is not visible
during Steam-Care
®
®
®
®
®
The dryer load is too small. Add more items or a few towels and
restart the cycle.
The dryer load is too large. Remove some items and restart the dryer.
Make sure the lint filter is cleaned before every load. With some loads
that produce high amounts of lint, it may be necessary to clean the
filter during the cycle.
Some fabrics are lint producers (for example, a fuzzy white cotton
towel) and they should be dried separately from clothes that are lint
trappers (for example, a pair of lack linen pants).
Divide larger loads into smaller loads for drying
Check pockets thoroughly before washing and drying clothes.
Small loads of 1 to 4 items work best.
Load fewer garments. Load similar-type garments.
Fabrics containing strong odors should be washed in a normal cycle.
This is steam condensation. The dripping water will stop after a short
time.
Sprayed water is difficult to see when the door is closed
INFORMATION CODES
Information codes may be displayed to help you understand what is occurring with your Dryer better.
tE Clogged Lint Screen
Vent is restricted
HE Invalid heating Temp in running the
dryer
dE Running the dryer with door open
dF Door is not closing properly
(DV422,DV400}
bE2 Unit detects a button is being
_ressed for over 30secs or button is
stuck
FE Invalid power source Frequency
Electronic Control Problem
(Communication Error)
Clean the screen or vent.
If the problem continues, call for service.
Call for service.
Close the door and then restart.
If the problem continues, call for service.
Call for service.
Make sure a button is NOT being pressed
continuously. Try restarting the cycle.
If the problem continues, call for service.
Try restarting the cycle.
If the problem continues, call for service.
Call for service.
For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG)
32 troubleshooting
DV400-03170A EN HUDSON-PJT vl.indd Sec4:32 2012-01-20 N 1:58:32