Clean The Lint Filter; Load The Dryer Properly; Getting Started - Samsung DV456EWHDSU/AA User Manual

CLEAN THE LINT FILTER
• After each load.
To shorten drying time.
To operate more energy efficiently.
[_Do not operate your dryer place.
without the lint filter in
Filter
Door
LOAD THE DRYER PROPERLY
•
Place only one washload in your dryer at a time.
•
In mixed loads, heavy and lightweight fabrics will dry differently. This may result in lightweight fabrics
being dry while heavy fabrics remain damp at the end of a drying cycle.
Add one or more additional similar items to your dryer when you are drying only one or two items. This
improves the tumbling action and drying efficiency.
Overloading restricts tumbling action, resulting in uneven drying as well as excessive wrinkling of some
fabrics.
GETTING STARTED
t. Load your dryer loosely - DO NOT overload.
2. Close the door.
3. Select the appropriate cycle and options for the load (see pages 23, 24, 25).
4. Press the Start/Pause button.
5. The dryer indicator light will illuminate.
6. The estimated cycle time will appear in the display.
The time may fluctuate as humidity levels fluctuate in the dryer.
,
hen the cycle is complete, "End" will appear in the display.
Pressing Power cancels the cycle and stops your dryer.
The Drying, Cooling, and Wrinkle Prevent indicator lights will illuminate during those portions of the
cycle.
Do not place anything on top of your dryer while it is running.
WARNIN_
28 operating instructions, tips
DV400-03170A EN HUDSON-PJT vl.indd Sec6:28 2012-01-20 [1_1:58:32