Good Picture And Sound Quality - RCA VR911HF User Manual

GOOD PICTURE AND souND QUALITY
To use the connection you must have:
• Coaxial cables, AN cables, and a Digital A/V cable.
This connection provides:
• Good picture quality from your VCR and satellite receiver.
To connect:
• Connect coaxial cables as shown.
• Connect AN cables as shown.
• Connect Digital A/V cable as shown.
Using This Connection
• In the VCR's Preferences menu, set the Auto TV/VCR
feature to ON.
To watch VCR programming:
1. Either turn off digital satellite receiver or set the TV/DSS
switch to TV position.
2. Tune TV to VCR output channel (3 or 4).
3. Press VCR1, then play a tape, or change channels on the
VCR°s tuner.
To watch digital satellite system programming:
1. Turn digital satellite receiver on and tune TV to DSS
output channel. Check your receiver's user's guide for
default output channels.
2. Press SAT•CABLE, then tune digital satellite system to
desired channel.
To watch antenna or cable programming:
Turn off VCR and digital satellite receiver.
.
2.
.
3.
t
48
Press TV, then tune the TV to desired channel. (If you
use a cable box, tune TV to cable box output channel w
usually channel 3 or 4.)
To record one program and watch another:
1. Begin recording a program using one of the
recording features.
PressVCR1, then set TV/VCR to TV.
Press TV, then select a different channel on the TV.
f
CABLE, CABLE BOX OR_ANTENNA ._TELLITE SIGNAL
I
[]
eo i I