RCA VR911HF User Manual page 6

STEP I:UNPACKTHE BOX
Carefully unpack the items in the box:
• VCR
• Remote control and batteries
• • RF coaxial cable
• AudioNideo cables
• Digital A/V cable
• D-VHS videocassette
STEP 2: INSTALL BA'I-FERIES IN THE
REMOTE CONTROL
Follow these steps whenever you need to install or change the
batteries in your VCR remote.
1. Remove the cover of the battery compartment.
2. Place batteries in the remote, matching the + and - ends of
each battery to the diagram inside the compartment.
3. Replace the cover.
STEP 3: CONNECT YOUR VCR
Use the diagram at the right to connect your VCR to a digital
satellite receiver and TV. This illustration shows a basic
connection that allows you to watch television and satellite
broadcasts, and record in both standard VHS and D-VHS formats.
Do not place the VCR on top of the digital satellite receiver.
.
Connect a coaxial cable from the cable or antenna lead to
the VCR's IN FROM ANT. jack. Connect a second cable from
the VCR's OUT TO TV jack to the satellite receiver's IN FROM
ANT jack, and a third from the satellite receiver's OUT TO TV
jack to the TV's CABLE/ANTENNA jack.
2. Connect Audio/Video cables to the satellite receiver (both
sets are output jacks) and the VCR's (SATELLITE) IN jacks.
3. Connect the Digital A/V cable to the satellite receiver and
VCR.
CABLE,CABLI[ 80X OR_ANTENNA SATELLITESIGNAL
I
°1
4