RCA VR911HF User Manual page 17

F.ADV (Frame Advance) In standard VHS mode lets you view
one frame with each press of the button when tape is in pause.
FWD (Forward) Fast forwards the tape when the VCR is
stopped. Searches forward through a tape during playback.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels.
INFO Shows the status displays on the TV screen.
INPUT! Selects between the line inputs and the VCR's tuner. Line
input refers to the signal coming from the component connected
to the audio/video input jacks on the back (LINE 1) or front
(LINE 2) of the VCR.
MENUoPROG Displays VCR MAIN MENU on the TV screen. Used
to select a menu item or exit a menu.
Numbers (0 through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 -- appears on the screen. Then press the other
two numbers.
PAUSE Pauses playback or recording. Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
PWR Turns off the VCR when the remote is set to control
the VCR.
REC Starts VCR recording. Also used for express recording.
REV Rewinds the tape when the VCR is stopped. Searches
backward through a tape during playback.
SEARCH Displays Index and Go-To Search menus on TV screen
when VCR is stopped. During playback, each press of the button
advances the tape 60 seconds of recorded material.
SLOW + AND - Used to activate slow-motion playback in
standard VHS mode.
SPEED In standard VHS mode selects a recording speed (SP
or SLp).
STOP Stops the current VCR function such as record, playback,
rewind, or fast forward.
Visual Search in D-VHS Mode
Visual search, slow motion, and
frame advance are available only in
standard VHS mode. In D-VHSmode,
a still picture is displaye d during
forward/reverse search, while the
tape time counter indicates tape
position. A still picture is also , _
displayed when the VCR i s paused:
15