RCA VR911HF User Manual page 7

If you have a TV with AUDIO/VIDEO jacks, use the jacks for a
better connection. For additional information and connection
options, refer to the Connections section toward the back of the
manual.
STEP 4: PLUG IN THE VCR
Match the wide blade of the plug with the wide slot in the
outlet. Be sure to insert the plug completely.
STEP 5: TUNE THE TV
Tune the TV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 or the TV's video input, depending on
the connection you've chosen,
• If you connect your VCR using the ANTENNA connectors with
RF coaxial cable, set the CH3-4 switch to channel 3 or 4--the
• channel you want to use on your TV.
• If you connect your VCR using the AUDIO/VIDEO jacks with
audio/video cables, select the TV's video input to see the
signal. See your TV Owner's Manual.
i ii
TV * VCR EJECT
To select channel 3 or 4, open the VCR's
front panel, press and hold EJECT,then
press TV/VCR.
STEP 6: TURN ON THE VCR
Press POWER on the VCR's front panel, or VCR on the remote to
turn on the VCR. To set up the VCR, you will need to understand
how to move through and change items in the on-screen menus.
STEP 7: ACCESS THE MENUS
The MENU-PROG and number buttons let you access, select and
change menu items. For example, to change the AUTO PLAY
setting, you would do the following:
VCR Viewing Channel
When using the IN FROM ANT and OUT
TO TV jacks to connect your VCR, tune
your TV to channel 3 or 4.
When using the audiolvideo jacks to
connect your VCR, tune your TV to the
TV's video input.
5