Table of Contents
Advertisement
PROGRAMMINGTHEI,
REMOTE
TO
,_.......
CONTROL
A LASER DISC PLAYER OR
DVD
PLAYER .........................
The VCR2oDVD button on the remote is programmed to
control a VCR set to respond to the VCR2 button or an
RCA, ProScan, or GE laser disc player.
If you have an RCA, ProScan, or GE DVD player, you can
program the VCR2.DVD button to operate it.
1.
Turn on the component.
2.
Look up your component and its code number in the
code list on the right.
3.
Press and hold the VCR2oDVD button on the remote.
4.
Enter the three-digit code from the code list.
5.
Release the VCR2oDVD button, and press PWR. If the
component turns off, setup is complete.
NOte: For DVD control,
the PLAY button functions
as
SELECT.The MENU button brings up the DVD disc menu.
OPERATE
TH E COMPONENT
After you have set up your remote, see which button will
operate
it.
1.
Point the remote at the component,
and press
VCR2oDVD. If it does not turn on, press VCR2oDVD
and then PWR.
.
You may want to experiment
to see which buttons
will
operate
your component.
Try pressing buttons,
such as
CHAN up or down.
I
RCA, ProScan,
and GE Codes
1
VCR .......................................
037
Laser Disc Player .................
037
DVD Player ..........................
078
This remote may not operate all
1
models of the brands that are shown.
33
Advertisement
Table of Contents
