Copying And Editing Tapes Using Two Vcrs; Picture Search Options; Forward And Reverse Search - RCA VRC440 User Manual

Table of Contents

Advertisement

VCR Features
CABLE BOX or ANTENNA
IN
OUT
PLAYBACK
VCR
AUDIO
OUT
VIDEO
RECORDING
VCR
AUDIO
OUT
VIDEO
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
28
15763820 (VRC440)(E) 07 Ftrs
28

Copying and Editing Tapes Using Two VCRs

Use one VCR as the playback VCR and the other as therecording VCR.
1. Turn on the TV and VCRs.
2. Tune the TV to the VCR viewing channel (either 03, 04, or the TV's Video
Line Input).
3. If you connected your VCR using the ANT. IN and RF OUT jacks, tune the
recording VCR to channel 3 or 4—whichever is selected on the back of the
playback VCR.
If you have connected your VCR using the A/V jacks, press INPUT on the
recording VCR's remote control to select the Video Line Input. Select L1 for
ANT. IN
the jacks on the back of the VCR or L2 for the jacks on the front.
IN
RF OUT
CH
4. Insert the tape you want to copy into the playback VCR. Insert a tape with
3
4
its safety tab in place into the recording VCR.
5. Press the
When you reach the point on the tape or program where you want to
begin copying, press the
adjust the tracking.
ANT. IN
6. Press the REC/OTR button and then press
recording VCR.
IN
RF OUT
CH
3
4
7. Press the
remote of the recording VCR at the same time to begin copying the tape.
TO TV
8. To edit segments that you do not want to copy:
Press
copying.
Locate the next segment you want to copy on the playback VCR by
using the
Press the
remote of the recording VCR at the same time to begin copying the
tape.
9. Press on the remotes of both VCRs when finished.

Picture Search Options

The basic way to search during playback is using the remote control's
buttons (FWD and REV on the VCR). This section contains several other
options available for searching a tape.

Forward and Reverse Search

You can search a tape during playback either forward or in reverse in
direction.
Note: Sound is turned off during search.
1. Press the
backwards.
2. Press the
button on the remote of the playback VCR to begin playback.
button to pause the VCR. You may need to
button on the remote of the playback VCR and
during recording on the remote of the recording VCR to pause
,
, and
on the remote.
button on the remote of the playback VCR and
button to search forward or the
,
, or
button to return to normal playback.
5/25/01, 12:52 PM
on the remote of the
on the
on the
or
button to search
Chapter 4

Advertisement

Table of Contents
loading

Table of Contents