Table of Contents
Advertisement
Will not Auto
Channel
Search active channels
correctly
•
Check to make sure the antenna connections are secure and correct.
•
Check to make sure the Signal Type: CABLE!ANTENNA feature is set correctly.
Tape plays back in slow motion
(standard
VHS mode)
•
Press PLAY to return to normal playback.
Cannot
select channels over 69
•
Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA,feature
isset to CABLE.
Cassette
with
safety
tab removed
does not start to play automatically
•
Check to make sure the Auto Play ON/OFF feature is set to ON.
CASSETTE Indicator
flashes
in display
•
Check to make sure there is a cassette in the VCR when a timer recording is set.
Time counter disappears during searching
•
This isnormal.
No stereo
sound during
playback
(standard
VHS mode)
•
Check to make sure the Playback: HI-FI/LINEAPJMIX feature is set to HI-FI to hear stereo sound during playback.
•
Must use the AUDiO/VIDEO output jacks on the back of the VCR to hear stereo sound.
Stereo audio
too noisy when
tuning
a broadcast
or cable TV channel
•
Stereo signal is weak. Set Reception: STEREO/MONO/SAP feature to MONO.
•
Pressone of the TRACKING up or down buttons to minimize the noise.
55
Advertisement
Table of Contents
