Table of Contents
Advertisement
Adapter/Charger
The adapter/chaxger
attaches to the camcorder
and lets you power your camcorder
directly
from standaxd household
power.
The adapter/charger
operates
on 100-240
volts, 50/60 Hz, so it can be used virtually
anywhere
in the world to power the
camcorder
or recharge
the battery.
To AC 100-240,
50/60 Hz
Adapter/
Charger
OUT
Jack
Attach Adapter/Charger
1. Connect one end of the DC cable to
the DC OUT jack on the adapter/
charger.
2. Connect the other end of the DC cable
to the DC in jack on the camcorder as
shown above.
3.
Plug the adapter/chaxger's
plug into
the nearest AC outlet (100-240V,
50/60Hz).
CAUTION:
DO n0t use thiS adapier!
I
charger tbr any other purpose other
I
than Ch_ging the FB 1260 or 244265 I
batte_ pac k or supplying power to the I
camcorder.
]
Remove Adapter/Charger
1. Unplug the adapter/charger from the
wall outlet.
2. Remove the DC cable from the
adapter/charger and camcorder.
Using
an Optional
Plug
Adapter
An optional
plug adapter
might be
required
in some countries.
Optional AC
AC 100-240V
Plug Adapter
1. Plug the adapter/chaxger's
plug into
the AC plug adapter.
2. Plug the AC plug adapter
into the AC
outlet.
12
Advertisement
Table of Contents
