Using The Adapter/Charger To; Power Your Camcorder - RCA PROV600 User Manual

Using the Adapter/Charger to Power Your Camcorder
The adapter/charger attaches to the camcorder and lets you power your camcorder
directly from standard household power. The adapter/charger operates on 100-240
volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the
camcorder or recharge the battery.
OPEN --1- _ ,.-
To AC Button
100-240,
50/60 Hz .a_!
Ad "___--°._ Jack DC Cable
Charger
POWER
Indicator
Attach Adapter/Charger
1. Connect one end of the DC cable to
the DC OUT jack on the adapter/
charger.
2. Press the OPEN button and open the
LCD monitor.
.
Connect the other end of the DC cable
to the DC IN jack on the camcorder
and run the cable through the cutout
as shown.
.
If the adapter/charger is properly
connected, its POWER indicator
will light.
::. ...
::: C _fib_;:ii:_:_;:Doi::aot use _hi_ adapter/
_ich ::f6r:any_0ther 0se other
iiii_ii:iJh_:;i g ihe AV55::!i::b_ttery
: p_'!i6r:iis_._plyingipowerii:to
Remove Adapter/Charger
1. Unplug the adapter/charger from the
wall outlet.
2. Remove the DC cable from the
adapter/charger and camcorder.
3. Close the LCD monitor and press on it
gently until it locks into place.
Using an Optional Plug Adapter
An optional plug adapter may be required
in some countries.
Optional AC //
Plug Adapter / AC 100-240V
1. Plug the adapter/charger's plug into
the AC plug adapter.
2. Plug the AC plug adapter into the AC
outlet.
11