Tv With Audio/Video Jacks And A Satellite Receiver - RCA VR650HF User Manual

TV WITH AUDIO/VIDEO JACKS AND DIGITAL
SATELLITE RECEIVER
This connection assumes:
• You have an advanced digital satellite receiver and your TV
has audio/video input jacks.
This connection provides:
• Stereo sound playback from VCR,recording from receiver while
watching cable or off-air channel, and recording one cable or off-
air channel while watching another.
To use this connection, you must have:
• (3) coaxial cables and (6) audioMdeo cables
If the VCR can control your digital satellite receiver:
• Position it above the VCR as shown. Make sure not to block
any of the VCR's ventilation holes.
To connect:
1. Connect cables as shown.
2. Return to the First Things First Section, then follow the steps.
VCR
Position Remote-Controllable
Saterlite Receiver
SATELLITE RECEIVER
........ ':L;':_.. "" •,'"'"_. ,,t ........ VCR'S
...... SIGNAL
/
TRANSMLI_ER
Using this Connection
• Tune your TV to its video input to record (or watch) the VCR
or digital satellite receiver.
• To record from the digital satellite receiver, tune your VCR to
its line input. L1 appears in the display.
To play a tape:
1. Insert a tape.
2. If necessary, press VCR and then PLAY.
To record one off-air or cable program and watch another:
1. Begin recording a program using a recording feature.
2. Select a different channel on the TV.
To record a digital satellite receiver program and watch a cable
or off-air channel:
1. Turn on the receiver, tune the VCR to its fine input, and begin
recording a program using a recording feature.
2. Select a different channel on the TV.
CABLE OR ANTENBA'_
SATELUTE SIGNAL
SATELLITE RECBVER
e
60