Table of Contents
Advertisement
connections
TV with audio/video jacks and satellite
receiver
This connection assumes:
•
You have an advanced satellite system.
•
Your TV has audio/video input jacks.
This connection provides:
•
Stereo sound playback from VCR.
•
Recording from receiver while watching cable or off-air channel.
•
Recording one cable or off-air channel while watching another.
To use this connection, you must have:
•
(3) coaxial cables, and (6) audio/video cables
To connect:
1. Connect cables as shown.
2. Return to the First Things First, then follow the steps.
Using This Connection
•
Tune your TV to its video input to record (or watch) the VCR
or satellite receiver.
•
To record from the satellite receiver, tune your VCR to its line
input ("L1" appears in display).
Auto TV/VCR Setting:
•
Set the Auto TV/VCR feature to OFF. Use of TV•VCR button is
not required.
To play a tape:
1. Insert a tape.
2. If necessary, press VCR and then PLAY.
To record one off-air or cable program and watch another:
1. Begin recording a program using a recording feature.
2. Select a different channel on the TV.
To record a satellite receiver program and watch a cable or off-
air channel:
1. Turn on the satellite receiver, tune the VCR to its line input
(L1), and begin recording a program using a recording
feature.
2. Select a different channel on the TV.
54
CABLE OR ANTENNA
SATELLITE SIGNAL
SATELLITE RECEIVER
IN FROM ANT
VIDEO
R AUDIO
OUT TO TV
CH3
S-VIDEO
CH4
VCR
MONO
L
L
VIDEO
R
R
IN
OUT
IN
OUT
CH
AUDIO
3
TV
VIDEO
VIDEO
R
INPUT 2
INPUT 1
R
R
L/MONO
L/MONO
L
S-VIDEO
AUDIO
OUTPUT
SATELLITE
IN
L
IN
FROM
ANTENNA
OUT
TO
TELEVISION
4
CABLE/
ANTENNA
Advertisement
Table of Contents
