Playing A Tape - RCA VR650HF User Manual

INFO Shows the TV's status displays on the TV screen.
INPUT Selects between the TV's input channel or tuner. Press to
see the VCR signal if you connected your VCR using the
AUDIO/VIDEO jacks.
MUTE Reduces volume to minimum level.
Numbers (0 through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 -- appears on the screen. Then press the other
two numbers.
ON.OFF Turns a compatible TV off and on.
VOL Up and Down Raises and lowers sound of TV.
PLAYING A TAPE
1. Tune the TV to your VCR viewing channel (3, 4, or TV's video
input--see page 71 for more about the video input channel).
2. insert a tape in the VCR.
If the Auto Play feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is removed).
* Press FWD on VCR (FORWARD on remote) or REV on VCR
(REVERSE on remote) to position the tape.
• Press PLAY PAUSE (if necessary) on VCR (PLAY on remote) to
begin tape play.
• Press PLAY PAUSE (PAUSE on remote) for stop action.
- Press TRACKING up or down to remove any streaks from the
picture, if necessary.
. Press STOP•EJECT on VCR (STOP on remote) to stop playback.
I Pause 1
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
Automatic Tracking
The VCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
another VCR. Automatic tracking is
turned on whenever a tape is
inserted or the VCR's power is
turned on.
26