Auto Clock Set Feature; Set The Time Zone - RCA VR650HF User Manual

AUTO CLOCK SET FEATURE
The Auto Clock Set feature is set to ON at the factory. In the
ON setting, t.he VCR looks for a channel carrying XDS
(Extended Data Services) information. XDS updates the clock
using the Coordinated Universal Time. To use this automatic
feature, certain steps are required such as Auto Channel
Search, setting the time zone, and setting the Daylight
Saving feature before the Auto Clock feature works.
SET THE TIME ZONE
1. Press MENU on the remote control to display the VCR
MAIN MENU.
VCR MAIN MENU
I VCR PLus+
2 Timer Recordings
S Time
ChanneLs
5 Setup
6 Preferences
7
Audio
Language
0 Exit
2. Press 3 to display TIME menu.
TIME
I Set Time and Date
2 Auto Clock Set: ON
3 Set Time Zone
4 Set Daylight Savings
XDE Time Data was
found on channel 20.
0 Exit
3. Press 3 to display the SET TIME ZONE screen.
SET TIME ZONE
What is your Time Zone?
I Eastern
2 Central
3 Mountain
4 Pacific
5 Alaska
6 Hawaii
7>Automatic
Press MENU to continue
4. Select your time zone, then press MENU to continue.
If you chose Automatic for your time zone, the VCR sets
the clock using the first Coordinated Universal lime
information it finds. If the time is not correct, select
another time zone or manually set the time and date
through the menu system.
Auto Clock Information
With a cable box, the VCR will not
reset the clock after a power outage
unless the cable box is set to the
channel carrying the XDS signal.
If Auto Clock Set is unsuccessful, try
tuning the VCR (or cable box) to
a channel carrying the broadcast
information (usually PBS), then turn
the VCR off. If the time does not set
within 10 minutes, set the time and
date manually through the menus.
Check your local cable system or TV
stations for availability of channels
with XDS.
15