Remote Buttons; Component Buttons; Vcr Function Buttons - RCA VR650HF User Manual

REMOTE BU'n'ONS
The backlit remote has a light button (e) that glows in the dark.
Press this button to light the buttons on the remote. The remote
buttons remain lit when they are pressed within a few seconds of
each other. If a button is not pressed within approximately seven
seconds, the light turns off to conserve battery power.
The remote control is capable of controlling your VCR and many
brands of televisions. If you have an R_:A, GE, or PROSCAN TV,
you may be able to control it without having to program the
remote.
COMPONENT BUTTONS
ON.OFF Turns off VCR when remote is set to control the VCR.
Also turns some compatible components on and off.
TV Turns on a compatible RCA, GF, or PROSCAN TV and sets the
remote to control the TV. Also used with the ON,OFF button to
turn on a different brand of TV (if programmed) and sets the
remote to control the "iV.
VCR Turns on a compatible RCA, GE, or PROSCAN VCR and sets
the remote to control the VCR.
VCR FUNCTION BUTTONS
CHAN Up or Down Selects next higher or lower channel in the
VCR's channel memory.
CLEAR Resets time counter to 0:00:00. Allows you to change
entries when setting the clock or a timer recording.
F.ADV Lets you view one frame with each press of the button
when tape is in pause.
FORWARD Fast forwards the tape when the VCR is stopped.
Searches forward through a tape during playback. Starts slow
motion during play-pause and increases slow-motion speed.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels. In menu mode, press
to go back to a previous menu.
INFO Shows the status displays on the TV screen.
24