Timer Recording With Vcr Plus+ System; Setting Up The Channel List; Using The Vcr Plus+ System - RCA VR650HF User Manual

,
Review the information to make sure it is correct, and then
press MENU to save.
Program I (One Time)
Channel 104 Cable
Start Time 08:00 PM
End Time 09:50 PM
Start Date 11/18/99 Thu
Tape Speed SLP
Press CLEAR to correct
Press MENU to save
w -
Program 1 has been saved
Remember to insert a
recordabLe tape and
turn the VER off before
the program start time.
Remember to
_eave yo_
cable box on and tuned
to the desired channel
TIMER RECORDING WITH VCR PLUS+
INTERACTIVE PROGRAM GUIDE SYSTEM
You can use the VCR Plus+ system code numbers to simp!ify timer
programming if you have cable IV and don't receive all channels
through a cable box, the VCR can control the cable box, or if you
receive your TV signal off-air.
SETTING UPTHE CHANNEL LIST
if you did not set up the VCR Plus+ programming system channel
list, you can do it now.
1. Display the CHANNELS menu from the VCR MAIN MENU.
2. Display the VCR Plus+ Channel List screen.
3. Go to section four, Setting Up Your VCR, if you need more
information on settingup your VCR Plus+ programming
system channel list.
USING THE VCR PLUS+ PROGRAMMING SYSTEM
1. Press MENU to bring up the VCR MAIN MENU.
vcg MAZN MENU
VCR PLus +
Ticer Recordings
Time
ChlnneLs
CHANNELS 1
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
VCR Plus+ Channel List
VCR÷ Charnel My channel
5 46
3 1> -> -> 23
2 ----
_se C_ ÷1- to select
Press 0-9 to change
Press MENU to save
VCR MAIN RENU
1 VCR PLus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 1 to display the VCR Plus+ system menu.
Ifyour eceivea|lchannelsthr ough
your cable box on Channel 3 or 4
and the VCR cannot ¢ontr ol your
cable box, you must use the r egular
13merRecor dingmethodtor ecord
program_
32