Tv With Audio/Video Jacks And Digital Satellite Receiver - RCA VR692HF User Manual

TV WITH AUDIO/VI DEO JACKS AND DIGITAL
SATELLITE RECEIVER
This connection assumes:
• You have an advanced digital satellite system and your TV
has audio/video input jacks.
This connection provides:
• Stereo sound playback from VCR, recording from receiverwhile
watching cable or off-air channel, and recording one cable or off-
air channel while watching another.
To use this connection, you must have:
• (3) coaxial cables and (6) audio/video cables
If the VCR can control your digital satellite receiver:.
• Position it on top of the VCR as shown. Make sure not to
block any of the VCR's ventilation holes.
To connect:
1. Connect cables as shown.
2. Return to the First Things First Section, then follow the steps.
VCR
TRANSMITTERS
'/ ............... h,
i" SATELLITE RECEIVER
......
', SIGNALS
\
WALL _!
Position Remote-Controllable
Satellite Receiver
Using This Connection
• Tune your "IV to its video input to record (or watch) the VCR
or satellite receiver.
66
To record from the digital satellite receiver, tune your VCR to
its line input (I.2 if you have connected the receiver to the
back jacks or L1 for the front jacks ).
Auto TV/VCR Setting:
• Set the Auto TVNCR feature to OFF. Use of TVoVCR button is
not required.
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
To record one off-air or cable program and watch another:
1. Begin recording a program using a recording feature.
2. Select a different channel on the TV.
To record a digital satellite receiver program and watch a cable
or off-air channel:
1. Turn on the receiver, tune the VCR to its line input, and begin
recording a program using a recording feature.
.
t
Select a different channel on the "IV.
TV
CABLE OR
ANTENNA
5ATIELLITIERECEIVER