RCA VR650HF User Manual page 70

No stereo sound during playback
• Check to make sure the TAPE PLAYBACK feature is set to Hi-Fi to
hear stereo sound during playback. The tape you are playing must be
recorded in Hi-Fi in order to use the HI-FI feature.
• Must use the AUDIO/VIDEO jacks on the VCR to hear stereo sound,
Stereo audio too noisy
• Stereo signal is weak, Set reception: STEREO/SAP/MONO feature
to MONO.
• Press one of the TRACKING up or down buttons to minimize the noise,
Index and Go-To search features do not operate
• Check to see if MOVIE ,I_ADVANCE feature isactivated.
cannot access MOVIE ,, ADVANCE feature
• Cassette must have safety tab removed and be recorded in SPspeed.
• Home Recording was selected for the tape type in the menu. Eject
cassette and reinsert.
VCR forwards through commercials or momentarily displays a blue
screen during playback.
• Commercial Advance Playback feature is set to AUTO. Set it to
MANUAL.
COMMERCIAL I_, ADVANCE feature does not mark commercials
when:
• The Marking feature is set to OFF in the COMMERCIAL ADVANCE
menu. Set it to ON.
• A recording is less than 15 minutes or the commercial is longer than
one minute.
• A single isolated commercial can not be marked.
• Recording started in the middle of a commercial segment.
• A commercial group within the first or last two minutes of a recording.
• Accuracy and effectiveness can vary depending upon program content
and the characteristics of the commercials.
• A commercial is between 30-ands45 seconds and 45-and-60 seconds.
• Effectiveness may vary when local television stations insert their own
commercials.
Commercials recorded even though COMMERCIAL b, ADVANCE
feature was set to ON.
• COMMERCIAL I,!_ ADVANCE is designed to record the commercials,
mark them, and then skip over the marked commercials during
playback,
68