Table of Contents
Advertisement
TO CHANGE
THE SIGNALTYPE
1.
Press MENU to displaythe
VCR MAIN MENU.
2.
Press 4 to display the CHANNELS menu.
3.
Press 3 to change the Signal Type between CABLE and
ANTENNA.
ADDING
OR REMOVING
CHANNELS
You may want to add or remove channels after you Auto
Channel Search, especiaUy if some of the channels have weak
signals or you don't want to watch them.
1,
2.
3.
Press MENU to display the VCR MAIN MENU.
Press 4 to display the CHANNELS menu.
Press 2 to display the ADD/REMOVE CHANNELS screen. Use
the CHAN up or down keys on the remote or number
buttons
to go to the channels you want to remove or add.
ADD/REMOVE
CHANNELS
Channel
115
is
presently
ADDED
Press
CLEAR
to
remove
Press
MENU
to
exit
ADD/REMOVE
CHANNELS
Channel
115
is
presently
REMOVED
Press
INFO
to
add
Press
MENU
to
exit
4,
When at the channel, it will be added if not already on the
list or deleted if it was. If the channel was added, you can
press CLEAR to remove it. If the channel was deleted, you
can press INFO to add.
TIME
AND
DATE
The VCR gives you two ways to set the time and date: the Auto
Clock Feature or manually. The Auto Clock Feature enables the
VCR to update the dock each time the VCR is turned
off. The
Auto Clock is advantageous
because it updates the time for you
automatically.
Before you set the time and date, set the Auto DST (Daylight-
Saving Time) feature to ON or OFF for your area.
Selecting Channels
The Channel up and down buttons
access those channels active in your
VCR channel list.
You can still access channels
not
on the channel
list by using the
number
buttons
on the remote
control.
12
Advertisement
Table of Contents
