Table of Contents
Advertisement
Will
not record
•
Check to make sure the safety tab is intact.
•
Check to make sure the VCR is not in the line mode. Press iNPUT on
the remote.
Clock shows incorrect
time
or date
•
Power interruption.
•
Check to make sure the clock is set accurately
(check AM/PM and
date).
•
Check Daylight-Saving
setting, The clock may have adjusted for
daylight-saving
time.
Time did not adjust for Daylight-Saving
time
•
Check to make sure daylight-saving feature is set correctly.
VCR makes noise when stopped
•
VCR is removing
tape from heads. This is normal. The head cylinder
inside the VCR will continue
to rotate for a few minutes after you
put the VCR in the stop mode.
Will not Auto Channel Search active channels correctly
•
Check to make sure the antenna connections are secure and correct.
Check to make sure the Signal Type: CABLE/ANTENNA feature
is set
correctly.
If Detect Automatically
was selected for the Signal Type in the AUTO
CHANNEL SEARCH menu, try using either CABLE TV or ANTENNA
instead.
•
May not be necessary if using a cable box for all channels. Contact
your local cable company
for more information.
Tape plays back in slow motion
•
PressPLAYto return to normal playback.
Cannot
select channels
over 69
•
Cable channels over 69 can only be selected if Signal Type: CABLE/
ANTENNA feature
is set to CABLE.
Cassette with safety tab removed does not start to play
automatically
•
Check to make sure the AUTO PLAY ON/OFF feature
is set to ON.
63
Advertisement
Table of Contents
