THINGS
TO KNOW
BEFORE
CONN ECTI NG COMPON
ENTS
Protect Your Components
from Power Surges
•
Connect
all components
before plugging any power
cords into the wall outlet.
•
Always
turn
off the TV
and other
components
before
you
connect
or disconnect
any cables.
V
V
Position Cables Correctly to Avoid Audio Hum or
Interference
•
Insert
all cable plugs firmly into their jacks.
•
Place the audio/video
cables to the sides of the TV's
back panel instead of straight
down the middle
after
you connect
your components.
•
Try not to coil any twin-lead
cables and keep them
away from the audio/video
cables as much as
possible.
•
Make sure all antennas
and cables are properly
grounded.
Refer to the SafetyTips
sheet packed with
your unit.
Protect Your Components
from Overheating
•
Do not block ventilation
holes in any of the
components.
Arrange
the components
so that air
can circulate
freely.
•
Do not stack components.
•
Allow adequate
ventilation
when placing your
components
in a stand.
•
Place an amplifier
or satellite
receiver
on the top
shelf of the stand so heated air rising from it will not
flow around
other components.
V
V
V
V
I 7 ONN T,ONS
V
51