Table of Contents
Advertisement
RECORDING
BROADCAST
STEREO TV OR SAP
(SECOND
AUDIO
PROGRAM)
Some TV programs are broadcast with stereo audio or SAP
(Second Audio Program).
1,
2.
3.
Turn on the TV and tune it to the VCR viewing
channel
(either 3, 4, or TV's video input).
Insert a tape with safety tab in place.
If your VCR viewing
channel is 3 or 4, make sure the VCR
indicator
appears in the VCR's display panel. If not, press
TV,VCR to turn it on.
4.
Use the SPEED button
on the remote to select a recording
speed. The tape speed indicator
appears on the TV screen.
5.
Select the channel or line input to be recorded.
6.
Set the Reception: STEREO/MONO/SAP feature for the type of
audio you want to record. See Other Features section.
AUDIO
I
Reception:
STEREO
2
Tape
Playback:
HI-FI
Video Input Channel
Explained
If you're having trouble
understandinq
the TV's Video Input Channel, turn to
page 68 for more information.
m
0
Exit
7.
Press RECORD to start recording.
8.
Press STOP when you are finished.
RECORDING
AUDIO
ONLY
You can record audio only from another
audio source connected
to the AUDIO IN (R and L) jacks on the back or front of the VCR.
1,
2,
3.
4.
Press the INPUT button
on the remote to select the line
input (L1 or L2). Select (L1) to record from the back jacks or
(L2) to record from the front jacks.
The VCR will record audio from the audio equipment
connected
to the AUDIO IN jacks.
Use TAPE SPEED on the VCR (SPEED on the remote) to select
the recording
speed.
Start audio source playing and press RECORD to begin
recording.
Press STOP when you are finished.
[
Recording
audio
only will erase
anything
that was previously
recorded
on the tape.
Audio Connection
BACK
OF VCR
our
AN I_
!
__L
AUDIO
RFOUT
@
@
BACK
OF AMPLIFIER
/ RECEIVER
)
33
Advertisement
Table of Contents
