Table of Contents
Advertisement
The VCR begins scanning for the available channels--this
takes about one to two minutes. The lowest channel is tuned
once the search is complete.
Pressing CHANNEL up or down
now selects the active channels.
To Change the Signal Type
1.
Press MENU to display the VCR MAIN MENU.
2.
Press 4 to display the CHANNELS menu.
3.
Press 3 to change the Signal Type between
CABLE and
ANTENNA.
CHANNELS
I
Auto
Channel
Search
2
Add/Remove
ChanneLs
3
Signal
Type:
CABLE
4
VCR
PLus+
Channel
List
0
Exit
To Add
or Remove
Channels
You may want to add or delete channels after you Auto Channel
Search, especially if some of the channels have weak signals or
you don't want to watch them.
.
2.
3.
Press MENU to display the VCR MAIN MENU.
Press 4 to display the CHANNELS menu.
Press 2 to display the ADD/REMOVE CHANNELS screen. Use
CHANNEL up or down, or number buttons, to go to the
channels you want to delete or add.
ADDIREMOVE
CHANNELS
Channel
115
is
presently
ADDED
Press
CLEAR
to
remove
Press
MENU
to
exit
ADD/REMOVE
CHANNELS
Channel
115
is
presently
REMOVED
Press
INFO
to
add
Press
MENU
to
exit
TIME
AND
DATE
Before you set the time and date, set the Auto DST (Daylight-
Saving Time) feature to ON or OFF for your area.
Selecting
Channels
'"
The CHANNEL up and down
buttons access those channels
active in your VCR channel list.
You can :still access channels not
in the channel list by using the
number buttons
on the remote.
10
Advertisement
Table of Contents
