Connection F: Tv, Vcr And Dss® Receiver - ProScan PS52690 User Manual

TV, VCR, AND DSS ® RECEIVER
This information
applies to Connection F in the Connections Foldout.
Connection F provides:
• stereo sound from broadcast programs
• stereo sound from VCR
• stereo sound from the DSS® receiver
To use this connection you must have:
• (4) coaxial cables
• (6) audio/video cables
• (2) S-Video cables (optional)
To connect:
1. Connect cables as shown in Connection F.
2. Return to First Things First, then follow the steps in the
Interactive Setup.
USING CONNECTION
F
To watch TV programs:
1. Turn off VCR and DSS® receiver.
2. Press TV and tune to a channel.
To watch DSS ® programming:
1. Press DSS•CABLE and tune to a channel.
To record off-air (cable or antenna) broadcasts and watch
a different channel:
1. Turn DSS® receiver off.
2. Press VCR1 and tune to a channel.
3. Press RECORD to begin recording.
4. To watch another channel, make sure the TV/VCR switch on the
VCR is set to TV; then press TV and tune to a channel.
To play a tape on the VCR:
1. Press VCR1 and then press PLAY.
See Connections Foldout, Connection F
67