Connect The Tv; Search For Channels; Set The Time - ProScan PS52690 User Manual

STEP 1
: CONNECT THE
TV
This section of the setup asks questionsabout the components you
have and walks you through the steps needed to connect your TV
to a VCR, Digital Satellite System receiver, and laserdisc player. If you
used the Connections Foldout to connect your TV, you can skip this
step or follow along for the sheer fun of it. If you haven't connected
your TV to any other components, answer the questions and follow the
on-screen instructions.
1 Follow the on-screen instructions to connect your TV and other
components. When you complete these instructions, you are
automatically taken to the next step in the interactive setup routine.
STEP 2: SEARCH FOR CHANNELS
The second step automatically searches for all channels available
through your antenna or cable TV system. This is also called
"Automatic Channel Search."
1. Follow the on-screen instructions to complete the automatic
channel search.
2. When the channel search is completed, press MENU to go to the
next step.
About the Remaining Steps
The remaining steps let you set the time and day, set up your speakers,
place channels in various lists, and label each channel. Some of these
steps, such as setting up your channel lists, can be time consuming.
Feel free to skip any or all of these steps and return to them later.
STEP THREE: SET THE TIME
1. Follow the on-screen instructions to set the time and day of the
week.
2. Point to Exitand press MENU to go to the next step.
A tip from Keith, the
Designing Engineer:
When you usethe Lists and Labels
control panel, use the arrow buttons
to point to any channel or field. Use
the CHAN buttons to point up or
down to any checkmarked channel in
whichever field you have selected.
19