Appendix C: Troubleshooting Tips - ProScan PS52690 User Manual

TROUBLESHOOTING
Troubles sometimes are caused by simple "faults" that you can correct
without the help of a service technician. If you experience any
difficulty with your TV, check a few basic remedies before calling your
service technician.
TV will not turn on
• Check to make sure it is plugged in.
• Check the wall receptacle (or extension cord) to make sure it is
"live" by plugging in something else.
• Maybe batteries in remote control are "dead."
• Maybe remote control is not aimed at remote sensor.
Controls don't work
• If using remote control, make sure remote is in TV mode by first
pressing TV button.
• Try unplugging set for two minutes and then plug it back in and turn
it on again.
...."roblems with Remote
• Maybe something is between the remote and the remote sensor.
Maybe the remote is not aimed directly at the component (TV or
VCR) you are trying to control.
• Maybe remote is not in TV Mode. Press the TV button so remote
will control TV.
• Maybe batteries in remote are weak or dead or installed incorrectly.
Try replacing the batteries.
Remote stops working
• Remove batteries and hold down one or more buttons for several
seconds. Install the batteries and try remote.
TV Turns off while playing
• Schedule function may be activated.
• Electronic protection circuit may have been activated because of a
power surge. Wait 30 seconds and then turn on again. If this
happens frequently, the voltage in your house may be
abnormally high.
Schedule does not turn off the TV at the set time
Check schedule on/off function (it must be set to On).
• Check to make sure clock is set to the correct time.
75