Connection F: Tv, Vcr And Dss Receiver - ProScan PS60690 User Manual

TV, VCR, AND DSS RECEIVER
This information applies to Connection F in the Connections Foldout.
Connection F provides:
• stereo sound from broadcast programs
• stereo sound from VCR
• stereo sound from the DSS receiver
To use this connection you must have:
• (4) coaxial cables
• (6) audio/video cables
• (2) S-Video cables (optional)
To connect:
1. Connect cables as shown in Connection F.
2. Return to First Things First, then follow the stepsin the
interactive Setup.
USING CONNECTION
F
To watch TV programs:
1. Turn off VCR and DSS receiver.
2. Press TV and tune to a channel.
To watch DSS programming:
]. Press DSS•CABLE and tune to a channel.
To record off-air (cable or antenna) broadcasts and watch
a different channel:
1. Turn DSS receiver off.
2. Press VCR1 and tune to a channel.
3. Press RECORD to begin recording.
4. To watch another channel, make sure the TViVCR switch on the
VCR is set to TV; then press TV and tune to a channel,
To play a tape on the VCR:
1. Press VCRI and then press PLAY.
See Connections Foldout, Connection F
67