Recording The Date And Time; Recording Speeds - RCA VC125HF User Manual

Playing Videotapes

Recording the Date and Time

The date and time stamp allows you to overlay the date and time at the beginning of your
recordings.
VCR & CHANNEL SETUP
VCR Plus Setup
Channel Setup
Date/Time Stamp
Auto Play/Rewind
Record Source
Panel Display
________________________
To Move To Select
GO BACK to Quit
32
To add the date and time stamp:
1. Press the SETUP/ENTER button on the remote.
All
2. Use the up and down arrow buttons to point to VCR & Channel Setup and
Both
then press the right arrow button to select it.
Auto
Bright
3. Move the selection arrow to Date/Time Stamp then press the right arrow
button to select from the following options:
• Timer—Time and date will appear only on timer recordings.
• All—Time and date will appear on every recording.
• None—Time and date will not appear.

Recording Speeds

You can change the recording speed from SP (Standard Play) to SLP (Super
Long Play) to fit six hour of programming on a T-120 VHS tape. The selected
recording speed will appear on the front panel display.
To change the recording speed:
1. Start the recording.
2. Press the SP/SLP button on the remote:
• SP—Standard Play, for best quality.
• SLP—Super Long Play, for maximum recording time (three times as long
as SP).
Maximum Recording Time—SP versus SLP
Tape Length
T-120
T-160
T-180
SP SLP
2 hrs 6 hrs
2 hrs 40 min 8 hrs
3 hrs 9 hrs
Chapter 3