Table of Contents
Advertisement
STEP 1
Unpack the TV. Make sure to locate the remote control
and
Connections
Foldout.
Important
Stand Information
CAUTION: Choose the location for your TV carefully. Take
precautions
that the stand or other furniture
the TV is placed on
is properly
located (see Important
Safeguards
sheet) and of
adequate
size and strength
to prevent the TV from accidentally
being tipped over, pushed off, or pulled off. This could cause
damage to the TV and/or personal injury.
STEP 2: CONNECTING
YOUR
TV
If you're only going to connect the TV to your home antenna or
cable system, use the "TV Only" connection
shown below. If
you're going to connect the TV to a VCR, satellite
receiver, DVD
player or other component,
look at the Connections
Foldout. The
Connections
Foldout details recommended
connection
schemes
for hooking
up the TV to a cable box or antenna,
one or two
VCRs, a laserdisc player, and a satellite
receiven
TV ON LY
This is a basic connection
from an antenna
or cable system to
your TV. Connect the cable as shown. If you have a VCR or other
components
to connect to the TV, skip to the top of the next
page.
TV WITH
OTH E R COMPON
ENTS
Use the Connections
Foldout to connect your TV to a VCR, DVD
player, and/or satellite
receiver. After connecting
your TV and
other components,
proceed to the next step. See Appendix
A for
detailed
information
about using each of these connections.
If your components
don't match those shown on the foldout,
or if
you prefer a different
connection,
see your dealer or specific
component
user manuals.
CABLE, CABLE BOX, OR ANTENNA
ANTENNA
TV Only Connection
4
Advertisement
Table of Contents
