Connecting Your Tv; Tv Only - RCA 1512786B User Manual

First Things First
Step 1
Unpack the TV. Make sure to locate the remote control and
Connections Foldout.
Important Information: Optional Stand
CAUTION: Matching stands were designed to be used with the
table model TV included in this book. The recommended stands
are provided with hardware to secure the TV to the stand so that
it cannot be easily pushed off, pulled off or tipped over. Your
RCA dealer can help you choose the appropriate stand for your
TV.
If you choose not to use the stand recommended for your TV,
take precautions that the stand or other furniture the TV is
placed on is properly located and of adequate size and strength
to prevent the TV from accidentally being tipped over or pulled
off. This could cause damage to the TV and or personal injury.
Stands are not available by mail order. To locate your nearest
RCA dealer, call 1-800-336-1900.
Step 2: Connecting your TV
If you're only going to connect the TV to your home antenna or
cable system, use the "TV Only" connection shown below. If
you're going to connect the TV to a VCR, satellite receiver, DVD
player or other component, look at the Connections Foldout. The
Connections Foldout details ten diagrams that are recommended
for hooking up the TV to a cable box or antenna, one or two
VCRs, a DVD player, and a satellite receiver.
CABLE, CABLE BOX, OR ANTENNA

TV Only

TV
This is a basic connection from an antenna or cable system to
VIDEO VIDEO R
INPUT 1 INPUT 2
your TV. Connect the cable as shown. If you have a VCR or other
R R
L/MONO
ANT
L/MONO L
components to connect to the TV, skip to the top of the next
S-VIDEO
AUDIO
page.
OUTPUT
4