Table of Contents
Advertisement
STEP 1
Unpack the TV. Make sure to locate the remote control and
Connections
Foldout.
Important
Information:
Optional
Stand
CAUTION: Matching
stands were designed to be used with the
table model TV included in this book. The recommended
stands
are provided with hardware
to secure the TV to the stand so that
it cannot be easily pushed off, pulled off or tipped
over. Your
RCA dealer can help you choose the appropriate
stand for your
TV.
If you choose not to use the stand recommended
for your TV,
take precautions
that the stand or other furniture
the TV is
placed on is properly
located and of adequate
size and strength
to prevent the TV from accidentally
being tipped
over or pulled
off. This could cause damage to the TV and or personal injury.
Stands are not available by mail order. To locate your nearest
RCA dealer, call 1-800-336-1900.
STEP 2: CONNECTING
YOUR
TV
If you're only going to connect the TV to your home antenna
or
cable system, use the "TV Only" connection
shown below. If
you're going to connect the TV to a VCR, satellite
receiver, DVD
player or other component,
look at the Connections
Foldout. The
Connections
Foldout details ten diagrams that are recommended
for hooking
up the TVto a cable box or antenna, one or two
VCRs, a DVD player, and a satellite
receiver.
TV ONLY
This is a basic connection
from an antenna or cable system to
your TV. Connect the cable as shown. If you have a VCR or other
components
to connect to the TV, skip to the top of the next
page.
CABLE,
CABLE
8OX,
OR ANTENNA
4
Advertisement
Table of Contents
