Dvd Player + Tv + Dolby Pro Logic, Dolby Digital ® Or Dts® Receiver - RCA RC5225P User Manual

Connections & Setup
TV
AUDIO OUT
R L
AUDIO IN
S-VIDEO VIDI_O IN
L
-!
CABLE OR OFF-AIR SIGNAL
7"-
ANTIN
e
S-Video cable
Is oplional
DVD
PLAYER
®
DOLBY DIGITAL or
DTS RECEIVER
Dolby Digital ® and DTS ®
Both Dolby Digital and DTS are audio formats used to record 5.1-channel audio signals onto the
digital track of film (while the film is being made). Both of these formats provide up to six
separate channels: left, right, center, left rear, right rear, and common subwoofer.
The disc will play 5.1-channel sound only if you've connected a DTS or Dolby Digital receiver or
decoder and if the original movie the disc was recorded from was encoded in the Dolby Digital or
DTS format.
Please Read This Before Using the DIG1TAL AUDIO OUT Jackl
This player's digital output jack is designed for a connection to a Dolby Digital or DTS
receiver or decoder.
Older digital equipment may not be compatible with the Dolby Digital bitstream. Such a
connection can create a high level of noise that may be harmful to your ears, and could
damage headphones or speakers.
It is important to choose the correct Digital Output setting in the DUE) Player's Sound menu,
eapecially when you use the DIGITAL AUDIO OUTjack. For more information, see chapter 5.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
DTS is a registered trademark of Digital Home Theater Systems,Inc.
10 Chapter I