The Sound Menu; Digital Output - RCA RC5225P User Manual

Using the DVD Player's Menu System
The Sound Menu
The So1_*ld menu lets you select different sound settings to nl;.itch the
equipment
}ou ]1axe
connected to your DVD Player.
Digital Output
Digital output lets you choose which type of digital audio is output fr(ml your I)VD player. If
you've used an optical cable to connect a l)olby Pro Logic, l)(_[by l)igita], or I)TS receiver, you
must adjust this setting. There are two options:
• Dolby Digital: Choose this setting if you connected a 1)olby Digital receiver.
• DTS: Choose this setting if yon connected a DTS receiver or decoder to your I)VD Player.
The default is Dolby Digital. To change the digital output:
R,el;t_n_ePlay 1.
progcam Play _ ...........
Lock 41JOigital Oulplal bOT$
Displ_ AnalOg Output S. _ Ci_nmeJ 2.
_IUP TruS_Jrr°und off
3.
tar_g_ges _ 5A • ChanneSl • Chanr_l Setup
Select the Digital Output option
from the Sound menu.
From the main menu. highlight and select the Sound option an([
press OK (the Sotmd menu is displayed).
Highlight the Digital Output option and press OK.
Highlight the desired OUtl_Utand press OK.
Press the left arrow 7key to return to the nlain l'l_lenu.
Note: If you set Digital OHtpl_t tO D_, you trot!! baz'e ),our DVD
Player con_wcted to a receit'er or decodc, r with the DZS"fi, atttr_,
and the disc you play must support the DTS a,diojbrmat, ifyou
choose DTS and your receil'er or decoder doesll 7 sltpport DTS;
you won't bear a* O, audio.
Chapter 5