Table of Contents
Advertisement
Other
Information
Troubleshooting
Remote
control won't work
•
If you are using a universal remote, you might be in the wrong mode. To operate your DVD Player, press DVD on the
remote before you press any other buttons.
If you're operating
the TV, press the TV button first, etc.
•
Insert new batteries
in the remote.
•
Operate
the remote control at a distance
of no more than 20 feet.
•
Remove any obstacles between
the remote and the DVD Player or other component.
If your DVD Player is in an
entertainment
cabinet, the glass doors may be obstructing
the remote control from operating
the unit. Open the doors.
•
Reset the remote. Remove batteries and hold down one or more buttons for about one minute to drain the
microprocessor
inside the remote to reset it. Reinstall batteries and try the remote again.
Can't advance through a movie
•
You can't advance
through the opening credits and warning information
that appear at the beginning
of movies
because
the disc is programmed
to prohibit that action.
The @ icon appears on screen
•
The feature or action cannot be completed
at this
time because:
1.
The disc's software restricts it.
2.
The disc's software doesn't support that feature (e.g., angles).
3.
The feature is not available at the moment.
4.
You've requested
a title or chapter number
that is out of range.
The picture is distorted
•
Did you connect your VCR to the DVD Player? Disconnect
it. See chapter
1 for the correct setup and connection.
•
The disc might be damaged.
Try another disc.
Picture is distorted during forward and reverse scan
•
It is normal for some distortion
to appear while scanning.
A screen saver appears
on the TV
•
Your player is equipped
with a screen saver that appears on the TV after your player has been idle for several minutes.
Press STOP or GO BACK•AGAIN on the remote to make the screen saver disappear from the screen and return to the
player's main menu.
Subtitle and/or audio language is not the one selected from the initial setting
•
If the subtitle and/or audio language
does not exist on the disc, the initial settings will not be seen/heard.
The disc's
priority language is selected instead. Set the subtitle and/or
audio language
manually through the Info Display or the
player menu.
The menu is displayed in a foreign language
•
The Menu Language preference
is set to that language. From the DVD player's main menu, selelct the Languages
option
(In Spanish, shown as Idioma_, in French, as Langues). From the Languages menu, select the Player Menus option (In
Spanish, shown as Men_s del Lector,, in French, as Menus Lecteur).
Highlight the language
you prefer and press OK.
Chapter 6
75
Advertisement
Table of Contents
