Table of Contents
Advertisement
Connections
& Setup
DVD Player + TV + Dolby Pro Logic, Dolby Digital
or DTS Receiver
To Connect the DVD Player
1.
Connect the left and right audio cables to your audio/video
receWer and to the AUDIO OUT
FRONT L (left - white) and R (right - red) jacks on the back of your DVD Player.
2.
If you have a Dolby Digital or DTS receiver, insert an optical digital cable (not provided)
to the
DIGITAL AUDIO OUT jack on the DVD player to the Digital Input jack on the back of the
receiver. You must also set the Digital Output setting in the Sound menu (see chapter
5).
3.
Connect
the video
cable.
• Basic video connection
- Connect the video cable (yellow) to the VIDEO OUT jack on the
back of your DVD Player, and to the Video Input jack on your TV.
OR
• S-Video (optional) _ If your TV has an S-Video Input jack, connect the S-Video cable to the
S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If
your 'IV doesn't have S-Video, use the basic video connection
listed above.
OR
• Component
video (optional)
- If your "IV has component
video (Y, PB, and
PR
jacks) use
video-grade
cables for the Y, Pw and P_ connections.
Note that it is essential to match the
color coded connectors
with a compatible
TV. If your TV doesn't have component
video,
use the basic video connection
listed above.
4.
Connect the AC power cord to the AC IN jack on the back of your DVD Player, and plug the
other end into an AC outlet.
Go to page 17
Chapter
I
11
Advertisement
Table of Contents
